Introduction
Liquid damage is the worst nightmare for any electronic device and its user. In today’s time when we are drowning in smart devices like phones and laptops, it is only obvious that sometimes we are not too careful with them. Since we are working on our MacBook round the clock, there is a high probability that we might spill something on it. However, MacBook liquid damage repair can become a difficult task if not handled properly. Even before we go to a repair center, there are a few steps to undertake in case of liquid damage.
Do’s and Don’ts of MacBook liquid damage repair:-
What to do-
The morning hour is a sprint for everyone. In those fast paced moments, spilling a beverage on your expensive MacBook is actually not that difficult to imagine. Let’s say there is a MacBook coffee damage to the MacBook. In those moments of panic, here are a few things you can do to minimize damage.
- Unplug the device- Before we move on to the MacBook liquid damage repair; let’s first remember to unplug the device from any or all the sockets. The liquid damage can in itself be an expensive repair. We do not want a hospital bill from any electric shocks. Also, remember to unplug any peripheral devices like speakers or printers connected to the Mac.
- Power down the MacBook- A simple but effective step in case of a MacBook water spill or any other liquids. If the MacBook is still on after the liquid is spilled, then the passing of current can either give you a shock or damage the Mac even more. Hence power the Mac as soon as you unplug all the devices.
- Put it into a tent like position- This step can save your MacBook in a lot of ways. All you have to do is flip the MacBook and put it into a tent like position. Sometimes the liquid can seep deeper into the motherboard. Therefore this tent like position will pull back the water into the keyboard which is an easier repair comparatively.
- Wipe and Wait 48 Hours- This step will depend on how much liquid is spilled on the Mac. If the liquid was in greater quantities, contact a proven service provider immediately for MacBook liquid damage repair.
If the liquid was let’s say MacBook wine spill then put it in a tent like position and wipe the visible liquid with a sponge or a liquid soaking cloth. After a clean wipe, let it stay in the tent like the position for 48 hours. Yes, it will be difficult to leave it like that for a long time but it’s for the best.
- Test the Mac- Once the MacBook is completely dry, it’s time for a basic test run. Try to power it back on and see if it works. If by a miracle the MacBook is still working, try to check all the buttons and features like the trackpad, connections, etc.
If the Mac doesn’t turn on or anything is not working, it’s time to get in an expert and plan MacBook liquid damage repair in Bangalore.
- Clean the MacBook externally– Cleaning the MacBook after successfully recovering it from liquid damage is more like a precautionary measure. In case of a MacBook wine spill or coffee damage, the surface may become sticky due to residue. Use a dry microfiber cloth to clean the exterior casing. Also, use a cotton bud or a toothpick to clean the air vents.
- Visit the Service center (Just in Case) – Even though we use our MacBook for the majority part of the day, there’s still no telling what went wrong. Liquid damage can harm the logic board or any other internal hardware. Therefore to be on the safe side, it is best to visit proven service providers like Soldrit to assist you in case of a MacBook water spill, etc.
What Not to Do-
- Forget the Rice Myth- The internet is filled with DIY fixes for MacBook liquid damage repair. The first one will always show keeping the device in an air tight rice container. But unfortunately, it will not work on a MacBook since it is much bigger and it will not soak water from the circuit board or any other internal part.
- Do not switch it on- Any spill damage to the laptop can corrode sensitive parts like the motherboard and circuit board. Switching it on will allow the electricity to flow through wet components and fry them.
- Do not Shake it or Use a dryer- Shaking the MacBook will only cause the liquid to move around even more and not come out. This will result in an even longer repair bill. Using a dryer to speed up the drying process will actually not dry any internal parts. On the other hand, the high velocity dryers will cause more damage to sensitive components due to overheating.
To Sum Up- These were the Do’s and Don’ts of MacBook liquid damage repair. Liquid damage can result in long bills at the repair center if it is not handled properly. However, with the help of skilled technicians at Soldrit, any MacBook user can minimize the liquid damage, if it follows the above noted points.